- DTN Headline News
How to Yield Check Crops
By Pamela Smith
Thursday, August 13, 2020 11:52AM CDT

DECATUR, Ill. (DTN) -- Crop tours and USDA reports are starting to heat up as the calendar races toward harvest. Yield checks are a good way to see how your corn and soybean yields measure up.

The week kicks off the DTN/Progressive Farmer 2020 Digital Yield Tour, powered by Gro Intelligence. The tour takes an in-depth look at how this year's corn and soybean crop is progressing using real-time yield maps, which are generated with satellite imagery, rainfall data, temperature maps and other public data.

Yield checks, like virtual tours, are a snapshot in time to assess potential of the crop. There are several different formulas used to figure yields, but here is a popular and simple approach:


1. Measure and record the row spacing (inches) used in the field.

2. Walk past the end rows into the bulk of the field, then walk about 35 paces down the rows before taking a sample. You are looking for a representative sample of the field.

3. Measure or step off 30 feet down the row. If you are doing a lot of sampling, a rope cut to length helps. Count all ears in the two adjacent rows. Divide that number by two and record it.

4. Pull the fifth, eighth and 11th ears from plants in one row of the sampling area.

5. Measure length of the portion of each ear that successfully developed kernels (do not include tip backed areas). Calculate the average ear length of the three ears in inches and record it.

6. Count the number of kernel rows on each ear. Calculate the average kernel row number and record it. Kernel row number should be an even number.

7. Grain yield is calculated by multiplying the average ear count by the average ear length by the average kernel row number, then dividing by the row spacing. Example: (43.5 ears x 6 inches x 15.3 rows) divided by 30-inch rows = 133 bu/ac yield estimate.

A good time to start doing yield checks is at dough or beginning dent stage. This formula doesn't reflect test weight. Crop uniformity also influences the accuracy of any yield estimation technique. The less uniform the field, the greater the number of samples that should be taken to estimate yield for the field. There is a fine line between fairly sampling disparate areas of the field and sampling randomly within a field so as not to unfairly bias the yield estimates up or down.

For more information on alternative formulas:





There is not a reliable method to convert pod counts to bushels per acre.

"On the ground" plot tours compare pod counts across various years and then make an estimate of how yields will move accordingly.

Here's one quick way to get a soybean sample:

1. Go to a representative area of the field, away from end rows. Walk 35 steps down the row and lay out a 3-foot plot, using either a 3-by-3-foot "frame" or tape measure and flags.

2. Count all the plants in that plot. Pull three plants at random.

3. Count all pods per plant. Ignore pods less than 1/4 inch in length at the top of the plant.

4. Average pod counts for the three plants.

If you want to skinny down the counting even more, some count the number of soybeans in 3 feet and multiply times 36 to get the 3-foot-plot figure. There will likely be small pods at the top of each plant. Whether those make beans at this stage depends on many things, so only pods 1/4 inch or larger are counted.

For other formulas for estimating soybeans:




For an infographic describing DTN in-field sampling go to: https://www.dtn.com/….

To see all the tour articles and related DTN stories about the 2020 crop, visit our tour site at: https://spotlights.dtnpf.com/….

Follow the tour through #DigitalYieldTour20

Pamela Smith can be reached at pamela.smith@dtn.com

Follow her on Twitter @PamSmithDTN

blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Monday, August 10, 2020 11:05AM CDT
Friday, August 7, 2020 11:55AM CDT
Monday, August 3, 2020 12:17PM CDT
Technically Speaking
Editorial Staff
Monday, August 10, 2020 8:49AM CDT
Monday, August 3, 2020 8:52AM CDT
Monday, July 27, 2020 9:22AM CDT
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Friday, August 7, 2020 8:08AM CDT
Thursday, August 6, 2020 10:39AM CDT
Tuesday, August 4, 2020 10:41AM CDT
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Sunday, August 9, 2020 11:08AM CDT
Friday, August 7, 2020 3:36PM CDT
Thursday, August 6, 2020 10:29AM CDT
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Tuesday, May 19, 2020 8:02PM CDT
Thursday, March 19, 2020 12:08PM CDT
Wednesday, March 18, 2020 11:19AM CDT
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Thursday, August 13, 2020 7:33AM CDT
Friday, August 7, 2020 2:03PM CDT
Tuesday, August 4, 2020 3:02PM CDT
DTN Production Blog
Pam Smith
Crops Technology Editor
Wednesday, August 12, 2020 10:24AM CDT
Friday, July 31, 2020 12:35PM CDT
Friday, July 24, 2020 12:26PM CDT
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Wednesday, August 12, 2020 10:38AM CDT
Monday, August 10, 2020 2:50PM CDT
Monday, August 3, 2020 3:14PM CDT
South America Calling
Editorial Staff
Wednesday, April 29, 2020 4:04PM CDT
Tuesday, April 21, 2020 1:29PM CDT
Tuesday, April 14, 2020 3:41PM CDT
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Monday, August 10, 2020 10:18AM CDT
Sunday, August 2, 2020 7:23PM CDT
Monday, July 20, 2020 2:25PM CDT
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Monday, August 10, 2020 12:53PM CDT
Thursday, July 30, 2020 5:05PM CDT
Tuesday, July 14, 2020 3:51PM CDT
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Wednesday, August 12, 2020 3:43PM CDT
Tuesday, August 11, 2020 3:39PM CDT
Monday, August 10, 2020 4:20PM CDT
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Thursday, August 13, 2020 11:42AM CDT
Monday, June 29, 2020 1:35PM CDT
Friday, June 5, 2020 4:14PM CDT
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN